Enemies sell the levels

Level design is more than the geometry of the levels. Blocks and power ups and traps all test the player's mettle, but it's the enemies that bring a level to life. Their personality and how well they fit the theme of the level is important for lore, but it's their behavior that makes the game play. Enemies that are varied and challenge the player in unique ways make for memorable experiences, especially when used in harmony with the level's geometry. 

Brilliant enemy design, brilliant level placement! (source: A Critical Look at Mega Man 3 Stages)

This article won't go into how and where to place enemies. Instead, it will focus on designing the enemy's behaviors. Just keep in mind that their placement and how they compliment the player's move and attack sets matter. Check out the super fun Super Mario Bros Crossover to see just how different enemy behavior can be when the player's character moves and attacks differently.

Also, note that this article is mainly about designing enemies in a 2D space. Some of this will apply to 3D enemies, but the differences in dimensions and movement directions between the two play spaces are a lot larger than they might seem.

 

Defining Enemy Behavior - States and Triggers

After playing through virtually the entire NES and SNES library, I took notes on enemy behavior and ended up categorizing it all.

Enemy behavior can be broken down into three main categories:

• Movement - How they Move
• Qualities - Their innate nature
• Abilities - The things they can do

By mixing and matching attributes of these three categories, you can create an Enemy State. Often, however, enemies have multiple states and switch through those states with "Triggers".

I created lists of attributes for each of these qualities. Most interesting enemy design can be made by mixing and matching these attributes into unique states and then further deepening the experience with a series of triggers. Most common enemies have at most two states with a single trigger, but Boss fights are special in that they often have four or more states with a variety of triggers. Bosses that don't usually aren't very fun (see Axiom Verge for examples of this). 

This list is very comprehensive and can describe the behavior of every enemy I could find in a retro game. I'm sure there are attributes and triggers I haven't listed, so if you know of any (especially Trigger ideas), leave a comment! Otherwise, this method can create every enemy from any top-down or side view action game you can think of.

Also, consider projectiles (bullets, arrows, fireballs, etc) as enemies too. Some very cool projectiles can be created for both enemies and player character using the same rules!

Without any further introduction, let's get to the attributes!

Movement

Stationary - The enemy does not move at all.

Walker - The enemy walks or runs along the ground. Example: Super Mario's Goombas

Riser - The enemy can increase its height (often, can rise from nothing). Examples: Super Mario's Piranha Plants and Castlevania's Mud Man

Ducker - The enemy can reduce its height (including, melting into the floor). Example: Super Mario's Piranha Plants

Faller - The enemy falls from the ceiling onto the ground. Usually, these enemies are drops of something, like acid. Some games have slimes that do this.

Jumper - The enemy can bounce or jump. (some jump forward, some jump straight up and down). Examples: Donkey Kong's Springs, Super Mario 2's Tweeter, Super Mario 2's Ninji

Floater - The enemy can float, fly, or levitate. Example: Castlevania's Bats

Sticky - The enemy sticks to walls and ceilings. Example: Super Mario 2's Spark

Waver - The enemy floats in a sine wave pattern. Example: Castlevania's Medusa Head

Rotator - The enemy rotates around a fixed point. Sometimes, the fixed point moves, and can move according to any movement attribute in this list. Also, the rotation direction may change. Example: Super Mario 3's Rotodisc, These jetpack enemeis from Sunsoft's Batman (notice that the point which they rotate around is the player)

Swinger - The enemy swings from a fixed point. Example: Castlevania's swinging blades

Pacer - The enemy changes direction in response to a trigger (like reaching the edge of a platform). Example: Super Mario's Red Koopas

Follower - The enemy follows the player (Often used in top-down games). Example: Zelda 3's Hard Hat Beetles

Roamer - The enemy changes direction completely randomly. Example: Legend of Zelda's Octoroks

Liner - The enemy moves in a straight line directly to a spot on the screen. Forgot to record the enemies I saw doing this, but usually they move from one spot to another in straight lines, sometimes randomly, other times, trying to 'slice' through the player.

Teleporter - The enemy can teleport from one location to another. Example: Zelda's Wizrobes

Dasher - The enemy dashes in a direction, faster than its normal movement speed. Example: Zelda's Rope Snakes

Ponger - The enemy ignores gravity and physics, and bounces off walls in straight lines. Example: Zelda 2's "Bubbles"

Geobound - The enemy is physically stuck to the geometry of the level, sometimes appears as level geometry. Examples: Megaman's Spikes, Super Mario's Piranha Plants, Castlevania's White Dragon

Tethered - The enemy is tethered to the level's geometry by a chain or a rope. Example: Super Mario's Chain Chomps

Swooper - A floating enemy that swoops down, often returning to its original position, but not always. Example: Castlevania's Bats, Super Mario's Swoopers, Super Mario 3's Angry Sun

Mirror - The enemy mirrors the movement patterns of the player. Sometimes, the enemy moves in the opposite direction as the player. Example: Zelda 3's Goriya

 

Qualities

GeoIgnore - The enemy ignores the properties of the level's geometry and can pass through solid objects. Examples: Super Mario 3's Rotodisc, many flying enemies will ignore geometry as well.

GeoDestroyer - The enemy can destroy blocks of thee level's geometry. Examples: Super Mario 3's Bowser, Bob-ombs.

Shielder - Player attacks are nullified when hit from a specific direction or angle, or hit a specific spot on the enemy. Example: Zelda 2's Dark Nuts

Reflector - Player's ranged attacks are reflected when the enemy is hit by them.

Damager - The player takes damage when colliding with the enemy. Most enemies have this.

Redamager - The player takes damage when striking the enemy. Example: Link to the Past's Buzz Blob

Secret spot - The enemy has a specific spot where damage can only be taken when that spot is hit. The opposite of a Shielder. Many bosses have this attribute.

Invulnerable - The enemy cannot be harmed or killed. Examples: Most are geometry based hazards (spikes, mashing blocks, fire spouts), but also includes enemies like Super Mario 3's Boo Brothers.

Reanimator - The enemy is revived after dying. Examples: Castlevania's Skeletons, Super Mario's Dry Bones.

Regenerator - The enemy's health is regenerated over time.

Secret Weakness - The enemy is vulnerable to specific types of attacks (fire, magic, arrows, etc). Example: Zelda's Dodogno (weakness to bombs).

Hard to Hit - These enemies are specifically hard to hit with by the player's normal attack ranges. They are often very fast, or very tiny. Example: Zelda 2's Myu

Segmented - These enemies are made up of smaller individual objects or enemies. Each individual segment can often be destroyed independently, and are often in snake-form - but not always. Example: Zelda's Manhandla, Super Mario's Pokeys

Bumper - These enemies act like pinball bumpers, pushing the player (or other objects) away quickly. Example: Zelda 3's Hard Hat Beetles

GeoMimic - These enemies have properties of level geometry. Most commonly, this means the player can stand on them. Examples: Most enemies in Mario 2, Megaman X's Sigma, Castlevania's Catoblepas

Alarm - An enemy or object that causes another enemy or object to react. I didn't record any specific examples, unfortunately.

Meta-vulnerable - The enemy can be defeated by meta-actions the player takes such as resetting the game, purchasing an in-app item, sharing the game on social networks, playing the game upside down with an accelerometer/compass, playing the game in a well-lit room, making noise in a microphone, etc. Example: Japanese Zelda's Pol's Voice

Abilities

Melee Attack - The enemy has a close-range attack.

Emitter - The enemy 'emits' another enemy or projectile. This type is very similar to the Thrower, and the differences are mostly semantic. The main difference being that throwers throw an object they've picked up or spawn with, while Emitters have an infinite supply of the things they can throw out. Examples: Super Mario 3's Bullet Bill Cannons, Super Mario's Lakitus, anything that has a gun, Gauntlet's enemy spawners.

Thrower - The enemy can throw whatever it is holding (an object, the player, or another enemy). This is often combined with Carriers, but not always. Examples: Castlevania's Barrel throwing Skeletons, Super Mario 3's Buster Beetle

Grower - The enemy can grow in size.

Shrinker - The enemy can shrink in size.

Forcer - The enemy can apply direct movement force to the player. I don't have any specific examples, but treadmills found in most games apply, as well as enemies who blow air at the player, causing them to move backward.

Carrier - The enemy can carry another enemy, an object, or the player. This one is a bit broad but includes enemies that pick up the player, that 'eat' the player and spit it out again, or otherwise grab and restrict the movement of the player. Example: Zelda's WallMasters

Splitter - The enemy can split into multiple other enemies while destroying itself. Examples: Rogue Legacy's Slimes, Legend of Zelda's Vire and Biri.

Cloner - The enemy can duplicate itself. Often, the duplicate is an exact clone, but sometimes, the duplicate is very slightly modified (such as having reduced health or being faster). The enemy that does the cloning is not destroyed. Example: Zelda's Ghini

Morpher - The enemy morphs into another enemy type. Sometimes, this is temporary, and sometimes, the enemy will morph into multiple other types of enemies. 

Sapper - The enemy can cause the player's stats to be modified (slower speed, reduced or eliminated jump, inability to attack, etc). These effects can be either permanent or temporary.

Latcher - Like a Sapper, the enemy can drain the player's stats and abilities but does so by latching on to the player. Example: Mario 3's Mini-Goombas, Zelda's Like-Likes.

Hider - The enemy can hide from the player. Typically, the enemy is hidden until the player comes within a set distance or the inverse where the enemy hides once the player comes too close. Example: Mario's Piranha Plants.

Exploder - The enemy can destroy itself and cause splash damage. Example: Proximity Mines found in many games, Mario's Bo-Bombs

Interactor - The enemy can interact with scripted objects, such as levers or buttons.

Charger - The enemy will pause its behavior between switching to another behavior example: Castlevania's Wolves (Who pause a moment and lunge towards the player)

Meta-Manipulator - The enemy can manipulate meta objects, such as the time of the day, the weather, the player's gender, save files, or unlock game modes.

 

Triggers

Random - The enemy randomly switches to a new state.

Timed - The enemy will switch to a new state after a certain period of time has passed.

Time Cycle  - The enemy will switch states depending on the time of day. For example, sleeping during the night, active during the day.

Distance Traveled - The enemy has traveled a certain distance

Proximity - The enemy is within a certain distance of another object, usually the player, but can also be another enemy, an object in the level, or a projectile.

Post-Ability - The enemy just finished using an ability. Example: The enemy shoots a bazooka, then hides behind the level geometry

Occupies Volume - The enemy has entered a volume of space. This can be a volume like a water zone, or an invisible volume defining the boundaries of a town.

Stat Value  - The enemy changes its behavior depending on its own stats or the stats of the player. Examples: The enemy's health drops below 10% and it explodes, or the player has over 500% magic points and the enemy tries to siphon it away.

Line of Sight - The enemy can personally 'see' the player, another enemy, or an object.

Scripted Event - A scripted event causes the enemy to change its behavior. 

Someone Else - A trigger is invoked on another enemy. Example: One enemy falls below 20% health and all the other enemies rush at the player.

Death  - The enemy runs out of health or otherwise dies.

 

Variables

Many of these behaviors and attributes can be modified to create even more variation by tweaking just a few variables. In fact, variables could be all that change when triggers are invoked. Here are some examples:

• Movement Speed
• Jump Height
• Sine Wave Length and Amplitude
• Attack Range
• Splash Damage Radius
• Enemy Size
• Dash Distance
• .. and so on

Think about what values you plug into your behaviors and if it would be better to increase or decrease those values to make even more unique enemies. A fast moving Goomba is more of a threat than a slow one!

 

Have Fun!

This is a pretty fun list to mix and match. It's sort of like a Lego system for behavior! In fact, I built a neat little interactive app a while ago on my Portfolio that assists in this, even letting you make randomized states that can be used as a base. Feel free to play around with it, and above all, have fun! That's what game design is all about <3