I followed the instructions at http://gentoo-wiki.com/HOWTO_Xbox_360_controller_on_Linux and step by step this is what I got.
if you can make sense out of it here is exactly what i typed in my terminal what happend, and what errors I got.
carl@ubuntu7:~$ sudo apt-get install linux-headers-´uname -r´ build-essential
Password:
E: Command line option 'r' [from -r´] is not known.
carl@ubuntu7:~$ sudo apt-get install automake1.9
Reading package lists... Done
Building dependency tree
Reading state information... Done
automake1.9 is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 67 not upgraded.
carl@ubuntu7:~$ gedit ~./.xpa360/Makefile
** (gedit:11477): WARNING **: Hit unhandled case 1 (File not found) in gedit_unrecoverable_saving_error_message_area_new.
carl@ubuntu7:~$ cd /home/carl/.xpad360
carl@ubuntu7:~/.xpad360$ sudo make
make modules -C /usr/src/linux-headers-2.6.20-15-generic SUBDIRS=/home/carl/.xpad360
make[1]: Entering directory `/usr/src/linux-headers-2.6.20-15-generic'
Building modules, stage 2.
MODPOST 1 modules
make[1]: Leaving directory `/usr/src/linux-headers-2.6.20-15-generic'
carl@ubuntu7:~/.xpad360$ sudo cp xpad.ko /lib/modules/$(uname -r)/kernel/drivers/usb/input
carl@ubuntu7:~/.xpad360$ sudo depmod -a
sudo modprobe xpad
sudo shutown -r 1
carl@ubuntu7:~/.xpad360$ sudo modprobe xpad
carl@ubuntu7:~/.xpad360$ sudo shutown -r 1
sudo: shutown: command not found
carl@ubuntu7:~/.xpad360$
Also, it said to type in dmesg and look at input 6 it should say Microsoft Xbox360 controller but it doesn´t and I also found that i got more errors than just the xbox controller, so here it is. Hope you can make sense of it. I can barely make sense of it, but also I am quite new to linux.
carl@ubuntu7:~$ dmesg
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000ce000 size: 0000000000002000 end: 00000000000d0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000000dde0000 end: 000000000dee0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000dee0000 size: 000000000000b000 end: 000000000deeb000 type: 3
[ 0.000000] copy_e820_map() start: 000000000deeb000 size: 0000000000015000 end: 000000000df00000 type: 4
[ 0.000000] copy_e820_map() start: 000000000df00000 size: 0000000002100000 end: 0000000010000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff800000 size: 0000000000400000 end: 00000000ffc00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fffffc00 size: 0000000000000400 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000dee0000 (usable)
[ 0.000000] BIOS-e820: 000000000dee0000 - 000000000deeb000 (ACPI data)
[ 0.000000] BIOS-e820: 000000000deeb000 - 000000000df00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000df00000 - 0000000010000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 222MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 57056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 57056
[ 0.000000] HighMem 57056 -> 57056
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 57056
[ 0.000000] On node 0 totalpages: 57056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 413 pages used for memmap
[ 0.000000] Normal zone: 52547 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f7780
[ 0.000000] ACPI: RSDT (v001 PTLTD ManiaDth 0x06040000 LTP 0x00000000) @ 0x0dee69cd
[ 0.000000] ACPI: FADT (v001 INTEL MONTARA 0x06040000 PTL 0x00000050) @ 0x0deeaec4
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x0deeafd8
[ 0.000000] ACPI: SSDT (v001 INTEL CPU0CST 0x00000001 INTL 0x20030224) @ 0x0dee6dfd
[ 0.000000] ACPI: DSDT (v001 INTEL MONTARAG 0x06040000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:ef800000)
[ 0.000000] Detected 1395.501 MHz processor.
[ 11.114853] Built 1 zonelists. Total pages: 56611
[ 11.114858] Kernel command line: root=UUID=d75ef2cc-b260-4442-8993-c101c1eed966 ro quiet splash
[ 11.115055] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 11.115063] mapped APIC to ffffd000 (011ca000)
[ 11.115067] Enabling fast FPU save and restore... done.
[ 11.115070] Enabling unmasked SIMD FPU exception support... done.
[ 11.115081] Initializing CPU#0
[ 11.115164] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 11.117068] Console: colour VGA+ 80x25
[ 11.117182] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 11.117296] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 11.125243] Memory: 215232k/228224k available (1992k kernel code, 12472k reserved, 893k data, 328k init, 0k highmem)
[ 11.125255] virtual kernel memory layout:
[ 11.125256] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 11.125258] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 11.125259] vmalloc : 0xce800000 - 0xff7fe000 ( 783 MB)
[ 11.125261] lowmem : 0xc0000000 - 0xcdee0000 ( 222 MB)
[ 11.125263] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 11.125264] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 11.125266] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 11.125270] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 11.203077] Calibrating delay using timer specific routine.. 2792.89 BogoMIPS (lpj=5585799)
[ 11.203127] Security Framework v1.0.0 initialized
[ 11.203137] SELinux: Disabled at boot.
[ 11.203157] Mount-cache hash table entries: 512
[ 11.203325] CPU: After generic identify, caps: afe9f9ff 00100000 00000000 00000000 00000000 00000000 00000000
[ 11.203339] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 11.203342] CPU: L2 cache: 1024K
[ 11.203345] CPU: After all inits, caps: afe9f9ff 00100000 00000000 00002040 00000000 00000000 00000000
[ 11.203356] Compat vDSO mapped to ffffe000.
[ 11.203362] Remapping vsyscall page to ffffe000
[ 11.203375] Checking 'hlt' instruction... OK.
[ 11.219163] SMP alternatives: switching to UP code
[ 11.219351] Freeing SMP alternatives: 11k freed
[ 11.219559] Early unpacking initramfs... done
[ 11.615259] ACPI: Core revision 20060707
[ 11.615652] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 11.617347] ACPI: setting ELCR to 0200 (from 0c28)
[ 11.625121] CPU0: Intel(R) Celeron(R) M processor 1.40GHz stepping 08
[ 11.625128] SMP motherboard not detected.
[ 11.625131] Local APIC not detected. Using dummy APIC emulation.
[ 11.625170] Brought up 1 CPUs
[ 11.625448] Booting paravirtualized kernel on bare hardware
[ 11.625529] Time: 4:29:26 Date: 05/24/107
[ 11.625562] NET: Registered protocol family 16
[ 11.625661] EISA bus registered
[ 11.625666] ACPI: bus type pci registered
[ 11.626046] PCI: PCI BIOS revision 2.10 entry at 0xfd932, last bus=2
[ 11.626049] PCI: Using configuration type 1
[ 11.626051] Setting up standard PCI resources
[ 11.635307] ACPI: Interpreter enabled
[ 11.635310] ACPI: Using PIC for interrupt routing
[ 11.636100] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 11.636106] PCI: Probing PCI hardware (bus 00)
[ 11.637083] Boot video device is 0000:00:02.0
[ 11.637386] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 11.637390] PCI quirk: region 1180-11bf claimed by ICH4 GPIO
[ 11.637781] PCI: Transparent bridge - 0000:00:1e.0
[ 11.637843] PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[ 11.637846] Please report the result to linux-kernel to fix this permanently
[ 11.637895] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
[ 11.637898] Please report the result to linux-kernel to fix this permanently
[ 11.637915] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 11.640666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 11.641781] ACPI: PCI Interrupt Link [LNKA] (IRQs *5)
[ 11.642014] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 11.642244] ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
[ 11.642473] ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
[ 11.642714] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 11.642948] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 11.643180] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 11.643415] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[ 11.644812] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 11.644831] pnp: PnP ACPI init
[ 11.647107] pnp: PnP ACPI: found 8 devices
[ 11.647112] PnPBIOS: Disabled by ACPI PNP
[ 11.647166] PCI: Using ACPI for IRQ routing
[ 11.647170] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 11.652678] NET: Registered protocol family 8
[ 11.652681] NET: Registered protocol family 20
[ 11.653065] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 11.653085] PCI: Bus 3, cardbus bridge: 0000:02:07.0
[ 11.653088] IO window: 00003400-000034ff
[ 11.653092] IO window: 00003800-000038ff
[ 11.653097] PREFETCH window: 20000000-23ffffff
[ 11.653101] MEM window: 2c000000-2fffffff
[ 11.653105] PCI: Bus 7, cardbus bridge: 0000:02:07.1
[ 11.653108] IO window: 00003c00-00003cff
[ 11.653112] IO window: 00001400-000014ff
[ 11.653116] PREFETCH window: 24000000-27ffffff
[ 11.653121] MEM window: 30000000-33ffffff
[ 11.653124] PCI: Bridge: 0000:00:1e.0
[ 11.653127] IO window: 3000-3fff
[ 11.653133] MEM window: e0200000-e02fffff
[ 11.653138] PREFETCH window: 20000000-27ffffff
[ 11.653151] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 11.653346] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 11.653349] PCI: setting IRQ 11 as level-triggered
[ 11.653353] ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 11.653361] PCI: Setting latency timer of device 0000:02:07.0 to 64
[ 11.653533] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 11.653536] PCI: setting IRQ 10 as level-triggered
[ 11.653540] ACPI: PCI Interrupt 0000:02:07.1 -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 11.653547] PCI: Setting latency timer of device 0000:02:07.1 to 64
[ 11.653578] NET: Registered protocol family 2
[ 11.690639] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 11.690727] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 11.690794] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 11.690828] TCP: Hash tables configured (established 8192 bind 4096)
[ 11.690832] TCP reno registered
[ 11.702693] checking if image is initramfs... it is
[ 12.490464] Freeing initrd memory: 6781k freed
[ 12.490758] Simple Boot Flag at 0x36 set to 0x1
[ 12.490975] audit: initializing netlink socket (disabled)
[ 12.490996] audit(1182659366.556:1): initialized
[ 12.491152] VFS: Disk quotas dquot_6.5.1
[ 12.491175] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 12.491234] io scheduler noop registered
[ 12.491237] io scheduler anticipatory registered
[ 12.491240] io scheduler deadline registered
[ 12.491252] io scheduler cfq registered (default)
[ 12.491714] isapnp: Scanning for PnP cards...
[ 12.845166] isapnp: No Plug & Play device found
[ 12.879152] Real Time Clock Driver v1.12ac
[ 12.879217] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 12.880082] ACPI: PCI Interrupt 0000:00:1f.6 -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 12.880093] ACPI: PCI interrupt for device 0000:00:1f.6 disabled
[ 12.880174] mice: PS/2 mouse device common for all mice
[ 12.880832] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 12.881122] input: Macintosh mouse button emulation as /class/input/input0
[ 12.881161] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 12.881166] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 12.881457] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 12.885145] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.885151] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 12.885302] EISA: Probing bus 0 at eisa.0
[ 12.885311] Cannot allocate resource for EISA slot 1
[ 12.885315] Cannot allocate resource for EISA slot 2
[ 12.885318] Cannot allocate resource for EISA slot 3
[ 12.885351] EISA: Detected 0 cards.
[ 12.915436] TCP cubic registered
[ 12.915445] NET: Registered protocol family 1
[ 12.915471] Using IPI No-Shortcut mode
[ 12.915551] ACPI: (supports S0 S3 S4 S5)
[ 12.915600] Magic number: 11:151:465
[ 12.915987] Freeing unused kernel memory: 328k freed
[ 12.917302] Time: tsc clocksource has been installed.
[ 13.101640] input: AT Translated Set 2 keyboard as /class/input/input1
[ 14.154157] Capability LSM initialized
[ 14.193656] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 14.193664] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 14.194929] ACPI: Thermal Zone [THRM] (77 C)
[ 14.622491] usbcore: registered new interface driver usbfs
[ 14.622516] usbcore: registered new interface driver hub
[ 14.622539] usbcore: registered new device driver usb
[ 14.623541] USB Universal Host Controller Interface driver v3.0
[ 14.623845] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
[ 14.623849] PCI: setting IRQ 5 as level-triggered
[ 14.623853] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 14.623865] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 14.623870] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 14.624074] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 14.624098] uhci_hcd 0000:00:1d.0: irq 5, io base 0x00001820
[ 14.624212] usb usb1: configuration #1 chosen from 1 choice
[ 14.624240] hub 1-0:1.0: USB hub found
[ 14.624246] hub 1-0:1.0: 2 ports detected
[ 14.684596] SCSI subsystem initialized
[ 14.690891] libata version 2.20 loaded.
[ 14.727603] ACPI: PCI Interrupt 0000:00:1d.1 -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 14.727619] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 14.727624] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 14.727650] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 14.727676] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
[ 14.727780] usb usb2: configuration #1 chosen from 1 choice
[ 14.727808] hub 2-0:1.0: USB hub found
[ 14.727815] hub 2-0:1.0: 2 ports detected
[ 14.773203] ieee1394: Initialized config rom entry `ip1394'
[ 14.786999] 8139too Fast Ethernet driver 0.9.28
[ 14.831752] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 14.831758] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 14.831772] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 14.831776] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 14.831804] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 14.831830] uhci_hcd 0000:00:1d.2: irq 10, io base 0x00001860
[ 14.831936] usb usb3: configuration #1 chosen from 1 choice
[ 14.831969] hub 3-0:1.0: USB hub found
[ 14.831976] hub 3-0:1.0: 2 ports detected
[ 14.937076] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
[ 14.937082] PCI: setting IRQ 3 as level-triggered
[ 14.937086] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 3 (level, low) -> IRQ 3
[ 14.937104] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 14.937109] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 14.937157] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 14.937194] ehci_hcd 0000:00:1d.7: debug port 1
[ 14.937200] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 14.937211] ehci_hcd 0000:00:1d.7: irq 3, io mem 0xe0100000
[ 14.941078] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 14.941193] usb usb4: configuration #1 chosen from 1 choice
[ 14.941224] hub 4-0:1.0: USB hub found
[ 14.941232] hub 4-0:1.0: 6 ports detected
[ 14.967210] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 3.888000] Time: acpi_pm clocksource has been installed.
[ 3.928000] ata_piix 0000:00:1f.1: version 2.10ac1
[ 3.928000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 3.928000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 3.928000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 3.928000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
[ 3.928000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
[ 3.928000] scsi0 : ata_piix
[ 4.096000] ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240
[ 4.096000] ata1.00: ATA-6: HTS541060G9AT00, MB3OA60A, max UDMA/100
[ 4.096000] ata1.00: 117210240 sectors, multi 16: LBA48
[ 4.104000] ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240
[ 4.104000] ata1.00: configured for UDMA/100
[ 4.104000] scsi1 : ata_piix
[ 4.440000] ata2.00: ATAPI, max UDMA/33
[ 4.596000] usb 4-3: new high speed USB device using ehci_hcd and address 3
[ 4.652000] ata2.00: configured for UDMA/33
[ 4.652000] scsi 0:0:0:0: Direct-Access ATA HTS541060G9AT00 MB3O PQ: 0 ANSI: 5
[ 4.720000] scsi 1:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462C GA02 PQ: 0 ANSI: 5
[ 4.724000] ACPI: PCI Interrupt 0000:02:07.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 4.776000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[e0202000-e02027ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.784000] usb 4-3: configuration #1 chosen from 1 choice
[ 4.796000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 4.796000] eth0: RealTek RTL8139 at 0xce916800, 00:03:25:1f:dc:7a, IRQ 10
[ 4.796000] eth0: Identified 8139 chip type 'RTL-8101'
[ 4.800000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 4.800000] sda: Write Protect is off
[ 4.800000] sda: Mode Sense: 00 3a 00 00
[ 4.800000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.800000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 4.800000] sda: Write Protect is off
[ 4.800000] sda: Mode Sense: 00 3a 00 00
[ 4.800000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.800000] sda:<6>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.824000] sda1 sda2 < sda5 >
[ 4.852000] sd 0:0:0:0: Attached scsi disk sda
[ 4.856000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.856000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.968000] usbcore: registered new interface driver libusual
[ 4.972000] Initializing USB Mass Storage driver...
[ 5.028000] Attempting manual resume
[ 5.028000] swsusp: Resume From Partition 8:5
[ 5.028000] PM: Checking swsusp image.
[ 5.028000] PM: Resume from disk failed.
[ 5.068000] kjournald starting. Commit interval 5 seconds
[ 5.068000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.200000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 5.200000] Uniform CD-ROM driver Revision: 3.20
[ 5.200000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.208000] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 5.420000] usb 1-2: configuration #1 chosen from 1 choice
[ 5.668000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 5.840000] usb 2-2: configuration #1 chosen from 1 choice
[ 5.844000] scsi2 : SCSI emulation for USB Mass Storage devices
[ 5.844000] usb-storage: device found at 3
[ 5.844000] usb-storage: waiting for device to settle before scanning
[ 5.844000] usbcore: registered new interface driver usb-storage
[ 5.844000] USB Mass Storage support registered.
[ 6.056000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0003252135021c11]
[ 10.844000] usb-storage: device scan complete
[ 10.844000] scsi 2:0:0:0: Direct-Access WDC WD60 0UE-00KVT0 0000 PQ: 0 ANSI: 0
[ 10.844000] SCSI device sdb: 117210240 512-byte hdwr sectors (60012 MB)
[ 10.848000] sdb: Write Protect is off
[ 10.848000] sdb: Mode Sense: 27 00 00 00
[ 10.848000] sdb: assuming drive cache: write through
[ 10.848000] SCSI device sdb: 117210240 512-byte hdwr sectors (60012 MB)
[ 10.848000] sdb: Write Protect is off
[ 10.848000] sdb: Mode Sense: 27 00 00 00
[ 10.848000] sdb: assuming drive cache: write through
[ 10.848000] sdb: sdb1
[ 11.148000] sd 2:0:0:0: Attached scsi disk sdb
[ 11.148000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 18.176000] Linux agpgart interface v0.102 (c) Dave Jones
[ 18.496000] intel_rng: FWH not detected
[ 18.496000] agpgart: Detected an Intel 855 Chipset.
[ 18.496000] agpgart: Detected 32636K stolen memory.
[ 18.504000] agpgart: AGP aperture is 128M @ 0xe8000000
[ 18.512000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 18.536000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.700000] iTCO_vendor_support: vendor-support=0
[ 18.704000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 18.704000] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
[ 18.704000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.768000] input: Microsoft Xbox 360 Controller as /class/input/input2
[ 19.316000] Yenta: CardBus bridge found at 0000:02:07.0 [161f:203a]
[ 19.468000] Yenta: ISA IRQ mask 0x0090, PCI irq 11
[ 19.468000] Socket status: 30000810
[ 19.468000] Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 19.468000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 19.468000] cs: IO port probe 0x3000-0x3fff: clean.
[ 19.468000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[ 19.468000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
[ 19.468000] Yenta: CardBus bridge found at 0000:02:07.1 [161f:203a]
[ 19.492000] ieee80211_crypt: registered algorithm 'NULL'
[ 19.496000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 19.496000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 19.540000] bcm43xx driver
[ 19.596000] Yenta: ISA IRQ mask 0x0090, PCI irq 10
[ 19.596000] Socket status: 30000006
[ 19.596000] Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
[ 19.596000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 19.596000] cs: IO port probe 0x3000-0x3fff: clean.
[ 19.596000] pcmcia: parent PCI bridge Memory window: 0xe0200000 - 0xe02fffff
[ 19.596000] pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
[ 19.608000] ACPI: PCI Interrupt 0000:00:1f.5 -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 19.608000] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 19.692000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x23aeb3, caps: 0xa04713/0x10008
[ 19.728000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 20.104000] pccard: PCMCIA card inserted into slot 0
[ 20.104000] cs: memory probe 0xe0200000-0xe02fffff: excluding 0xe0200000-0xe020ffff
[ 20.104000] pcmcia: registering new device pcmcia0.0
[ 20.380000] cs: IO port probe 0x100-0x3af: clean.
[ 20.380000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 20.384000] cs: IO port probe 0x820-0x8ff: clean.
[ 20.384000] cs: IO port probe 0xc00-0xcf7: clean.
[ 20.384000] cs: IO port probe 0xa00-0xaff: clean.
[ 20.388000] cs: IO port probe 0x100-0x3af: clean.
[ 20.388000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 20.388000] cs: IO port probe 0x820-0x8ff: clean.
[ 20.392000] cs: IO port probe 0xc00-0xcf7: clean.
[ 20.392000] cs: IO port probe 0xa00-0xaff: clean.
[ 20.428000] intel8x0_measure_ac97_clock: measured 55494 usecs
[ 20.428000] intel8x0: clocking to 48000
[ 20.428000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 198.988000] lp: driver loaded but no devices found
[ 199.052000] Adding 650592k swap on /dev/disk/by-uuid/e150b96e-3ac4-49b3-85a6-1afdc74ac4fc. Priority:-1 extents:1 across:650592k
[ 199.216000] EXT3 FS on sda1, internal journal
[ 200.028000] ACPI: Battery Slot [BAT0] (battery present)
[ 200.072000] ibm_acpi: ec object not found
[ 200.096000] No dock devices found.
[ 200.148000] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 200.188000] Using specific hotkey driver
[ 200.268000] input: Power Button (FF) as /class/input/input4
[ 200.272000] ACPI: Power Button (FF) [PWRF]
[ 200.316000] input: Lid Switch as /class/input/input5
[ 200.324000] ACPI: Lid Switch [LID0]
[ 200.368000] input: Sleep Button (CM) as /class/input/input6
[ 200.372000] ACPI: Sleep Button (CM) [SLPB]
[ 200.416000] input: Power Button (CM) as /class/input/input7
[ 200.420000] ACPI: Power Button (CM) [PWRB]
[ 200.432000] ACPI: AC Adapter [AC] (on-line)
[ 200.496000] pcc_acpi: loading...
[ 205.728000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 206.864000] [drm] Initialized drm 1.1.0 20060810
[ 206.872000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
[ 206.872000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 206.876000] [drm] Initialized i915 1.6.0 20060119 on minor 1
[ 207.656000] ppdev: user-space parallel port driver
[ 208.452000] apm: BIOS not found.
[ 208.640000] Bluetooth: Core ver 2.11
[ 208.640000] NET: Registered protocol family 31
[ 208.640000] Bluetooth: HCI device and connection manager initialized
[ 208.640000] Bluetooth: HCI socket layer initialized
[ 208.684000] Bluetooth: L2CAP ver 2.8
[ 208.684000] Bluetooth: L2CAP socket layer initialized
[ 210.680000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 210.732000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 212.956000] NET: Registered protocol family 17
[ 214.192000] NET: Registered protocol family 10
[ 214.192000] lo: Disabled Privacy Extensions
[ 224.700000] eth0: no IPv6 routers present
[ 235.484000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 260.216000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 284.992000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 309.804000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 334.620000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
then it told me to type in #cat /dev/input/js0 (which I went to that destination, and yes it does exist it is there) and type buttons, and i should see symbols if so xbox controller is working, else it isn´t working.
carl@ubuntu7:~$ #cat /dev/input/js0
Well the reason why I wrote this was because I truly read that tutorial, and did my best, but didn´t get the results I wanted. AH, I like linux I was able to fix my audio problem after really taking a look at what alsa is, and what it´s default settings are in alsamixer, and I fixed my wireless controller problem, and everything, and now I am still trying to throw the xbox360 controller on my system, so I can play games, and make games with it of course.
Well, whatever help/suggestions/tip/comments I do appreciate negative or positive. I´m just trying to learn all of this right now, and I am quite new to linux, but I do already love it.
oh also,
Thanks in advance,
c.s. Finch
